COREVNET-SHD

Category: CorevNet Mesh

Description

Reinforcement Mesh is an alkali resistant, treated glass-fiber reinforcing mesh for use with PRECOR and PRECOR-SB Systems. COREVNET is embedded into a wet layer of UNIBASE Basecoat Mixture or COREVBASE in order to create the basecoat lamina. COREVNET provides tensile strength to the protective lamina over the EPS insulation board.

Use recommended

COREVNET-ST reinforcing mesh (Standard) Used where minimal contact with the PRECOR wall system is anticipated. 4.4 oz./SY.

COREVNET-RF reinforcing mesh (Reinforced) Used as the minimum in high impact ground floor areas. This reinforcing mesh must be overlaid with COREVNET-ST. (10.6 oz./SY)

COREVNET-HD reinforcing mesh (Heavy Duty) Used in areas where greater contact and impact resistance is required. This reinforcing mesh must be overlaid with COREVNET-ST. (14.0 oz./SY)

COREVNET-SHD reinforcing mesh (Super Heavy Duty) Used in areas where the highest level of impact is anticipated. This reinforcing mesh must be overlaid with COREVNET-ST. (20.0 oz./SY)

COREVNET-DT reinforcing mesh (Detail) Used to encapsulate the edges of the EPS insulation board at all system terminations (wrap mesh). Also used for aesthetic joint preparation and other detail work. (2.0 oz./SY)

COREVNET-DTA reinforcing mesh (Adhesive-backed Detail) Used with the PRECOR-SB System to tape sheathing joints, as an element of the secondary water-resistive barrier. (2.0 oz./SY)

COREVNET CORNER reinforcing mesh A pre-bent reinforcing mesh for use at high impact corner locations. This reinforcing mesh must be overlaid with COREVNETST. (7.0 oz./SY)

Go to Top